Copyright © Premchem 2023
Site Development & Maintenance:
Designer Graphix Designer Graphix
Showing all 2 results
Home
Home
POLISHES
POLISHES
PREMCHEM P11 POLISH
Health and safety Data Use in a well ventilated flameproof area. Protective Clothing, gloves & goggles should be worn with an air fed mask when spraying. Storage: Products contain highly flammable solvents. Store in a flame proof area, away from any source of flame or excessive heat. The information herein is accurate and factual to the best of our knowledge and is given in good faith, However, no warranty is implied or expressed in respect of any recommendation or suggestions contained herein. The onus is on the end user to ensure the sustainability of this product to meet their requirements. Health & Saftey procedures when using this product are the end users responsibility.
PREMCHEM CAR WAX
250g
500g
1kg
5kg
250g
500g
1kg
5kg
PRODUCT DESCRIPTION
Recommended Surface: Preparation: Surface should be thoroughly cleaned, dry and free of dust, oil and grease.
This product is designed for vehicle refinishing and for professional use only. Chemical Basis:  General Qualities: An oil in water emulsion containing aliphatic hydrocarbons with  inorganic abrasive and emulsifiers Physical properties:   State: Paste Relative Density: 1.24 g/L Flash Point: 85 degree C Non volatile content: Viscosity: 20 - 22” (catalysed) Ford cup no4 @ 23 degree C Spreading rate: Range Availabilty:
Recommended Primer: N/A Overall Coatability: After rubbing it down it can be coated with most types of Products Recommended Thinner:  Application: Mixing Ratio: 24:1 by volume Application Method: Hand / Polishing machine Viscosity: product supplied ready for use Recommended D.F.T.  Drying Conditions Surface Dry: Air drying at 23 C & 65% relative humidity Flash off time: 5-8 mins @ 23 C Pot Life: 12 hours minimum
PREMCHEM RUBBING COMP
250g
500g
1kg
5kg
Showing all 2 results
Home
Home
POLISHES
POLISHES
PREMCHEM P11 POLISH
PREMCHEM CAR WAX
250g
500g
1kg
5kg
250g
500g
1kg
5kg
PRODUCT DESCRIPTION
This product is designed for vehicle refinishing and for professional use only. Chemical Basis:  General Qualities: An oil in water emulsion containing aliphatic hydrocarbons with  inorganic abrasive and emulsifiers Physical properties:   State: Paste Relative Density: 1.24 g/L Flash Point: 85 degree C Non volatile content: Viscosity: 20 - 22” (catalysed) Ford cup no4 @ 23 degree C Spreading rate: Range Availabilty:
PREMCHEM RUBBING COMP
250g
500g
1kg
5kg
Copyright © Premchem 2023
POLISHES
POLISHES
Menu